
6/11/2026
-
Ruhrtaler Stahlgesellschaft expands its cutting with a 15 kW laser system from the SMART Giant X series
Ruhrtaler Stahlgesellschaft mbH, headquartered in Schwerte, has invested in an XXL laser system from the SMART Giant X series from MicroStep Europa. "We can now cut very precise individual parts over a length of 15 meters – and thus open up new markets," says Peter Bierkandt, owner and managing director of the company.
For decades, the Ruhrtaler Stahlgesellschaft has stood for fast, flexible and reliable steel processing. Cutting forms the core of the company: On the basis of customer-specific drawings, components are created in a wide variety of materials, dimensions and batch sizes. With oxy-fuel and plasma technology, the company has already been able to cover a wide spectrum. However, the customers' requirements for accuracy, contour quality and ready-to-install parts have continued to increase. "Cutting is the core of our company. We have oxy-fuel cutting systems, plasma cutting systems and now also a laser cutting system, so that we can react directly to our customers in a specific way," explains owner and managing director Peter Bierkandt.
The investment in laser technology not only expands the company’s process portfolio. Above all, it creates added value for customers: Components that previously had to be cut by plasma or oxy-fuel and then machined by turning or milling can now be produced much closer to the final dimensions, depending on the required geometry and tolerances. Downstream processing steps can be reduced or completely avoided. This saves customers time, machining costs and internal capacities. "In the past, we manufactured parts with measurements that then had to be turned or milled. Now, in many cases, the customer can use the part directly," says Bierkandt, describing the decisive added value.
When choosing the system, it was clear to Ruhrtaler that a classic laser with a standard shuttle table would have unnecessarily limited the new possibilities. That's why the decision was made in favor of a large-format, customer-specific system from the SMART Giant X series from MicroStep Industry powered by ACCURL. Its processing area of around 15,000 × 3,000 mm enables the processing of exceptionally long individual parts and large-format nesting. This allows the company to serve orders that would not be possible on compact standard systems or could only be implemented with additional cutting, joining and post-processing operations. "We chose this laser system so that we can produce really long components and open up new markets. We can cut individual parts over a length of 15 meters," says Bierkandt.
The system is equipped with an MSE SmartControl control system, which MicroStep Europa developed together with the German control specialist Eckelmann. A 15 kW fiber laser source from Raycus and the EX-TRABEAM® cutting head from Thermacut combine to deliver precise and powerful cutting. At Ruhrtaler, materials processed include quenched and tempered steels such as C45 and 42CrMo4.
Depending on the material grade and specification, the configuration enables cutting of material thicknesses of up to approximately 35 mm. The large-format working area combines high precision with the power reserves required for steel processing, making it suitable for everything from one-off parts to demand-driven series production.
MicroStep Europa was not a new partner for Ruhrtaler Stahlgesellschaft. A MicroStep plasma cutting system has been in operation in the company for years. The experience with the service and support as well as the short response times were therefore a key factor in the new investment decision. The new system was tailored to the requirements in Schwerte, installed and commissioned in close cooperation with the operating team. “The installation and assembly went exceptionally well. Our employees received training at short notice, and everything has been running smoothly ever since,” says Bierkandt. He is equally positive about the collaboration itself: “The customer service is excellent, which is why I can highly recommend MicroStep Europa.”
The decision was made deliberately in economically challenging times. For Peter Bierkandt, it is part of a long-term corporate strategy: Ruhrtaler Stahlgesellschaft is to remain technologically competitive and be successfully handed over to the next generation. By entering large-format laser cutting, the family-owned company is creating an important basis for this – through higher precision, less reworking, an expanded range of parts and access to new markets.

23/3/2026
-
Modular laser platform for maximum precision, maximum flexibility and true digital intelligence
With the introduction of the new X-Series, ACCURL Europe presents a completely redesigned laser cutting platform designed to strengthen companies throughout their value chain. The platform comprises four series – SMART Cube X, SmartLINE X, MasterLINE X and SMART Giant X – and covers an exceptionally wide range of industrial requirements. The machines are aimed at companies that require precise 2D or 3D cutting of sheet metal in almost any format.
„With the new X-Series, we are presenting a highly innovative laser cutting platform that we have developed especially for the European market. The aim is to significantly strengthen our customers' production technologically – and thus also their competitiveness“, explains Johannes Ried, Managing Director of ACCURL Europe GmbH. The X-Series is the result of intensive development work and for the first time combines modular machine architecture, high laser power, maximum dynamics and end-to-end digital intelligence in a platform-based approach.

The SMART Cube X is the most compact version of the new platform and is designed for manufacturing companies where precision is required but space is at a premium. Despite its small dimensions, it offers a remarkably high level of efficiency and accuracy that is rarely found in this machine class. The system is ideal for companies that pursue high quality standards but at the same time need to remain flexible, for example in urban industrial parks or in established production structures with limited floor space. The series offers a working area of up to 1,500 x 3,000 mm and can be equipped with a laser source of up to 12 kW for 2D cutting.

The SmartLINE X bridges the gap between cost-effectiveness, high performance and growth. The 2D laser cutting system is equipped with an automated shuttle table and is targeted at companies that want to reliably increase their production at manageable investment costs and take it to a new level. The SmartLINE X is the ideal entry-level machine for all companies looking for a system that can produce quickly and highly efficiently – making it an ideal choice for small and medium-sized companies that want to take the next step towards automation and process optimization. The series offers a working area of up to 6,000 x 2,500 mm and can be equipped with laser sources of up to 20 kW.

At the top of the new platform is the MasterLINE X, which, as the high-end machine in the series, has been consistently designed for maximum dynamics, precision and performance. With its extremely high acceleration values, outstanding processing speeds and the ability to map both 2D and 3D cutting processes, it is ideally suited for industries where speed and accuracy are the most important competitive advantages. The MasterLINE X brings these properties to perfection and is therefore particularly suitable for companies with a massive volume of parts, demanding contours or particularly high material thicknesses. In addition, material handling to and from the series can be perfectly automated due to the special shuttle table design. The MasterLINE X is also available in the high-power range up to 60 kW with a working area of up to 8,000 x 2,500 mm.

The SMART Giant X was developed for large industrial formats and XXL material cuts. It covers the field of XXL sheet metal processing and enables users to process extremely large sheet metal sizes efficiently and precisely. The SMART Giant X is therefore the optimal solution for industries such as heavy steel construction, shipbuilding or plant engineering, in which exceptionally large workpieces are part of everyday life. It combines huge working areas with high performance and the ability to use both 2D and 3D laser cutting technology. The system is available as standard with a working area of up to 3,000 x 15,000 mm. However, the length can even be extended to 42,000 mm if necessary. Laser sources of up to 60 kW are also available here for cutting extremely large material thicknesses.
The X-Series was not only developed as a machine family, but is optionally available as a completely digital manufacturing platform. The X-Series is IndustryFusion Ready and can therefore be easily integrated into networked Smart Factory environments. The machines provide real-time information on energy consumption, capacity utilization, process stability, machine statuses and relevant performance parameters. This enables manufacturing companies to achieve unprecedented transparency, which has a direct impact on profitability, planning reliability and process quality.
With the integrated XANA AI Engine, ACCURL Europe is taking another step towards innovation. Artificial intelligence supports operators in machine operation, provides contextual recommendations, facilitates fault analysis and enables predictive maintenance strategies. This intelligent combination of mechanical engineering, digitalization and AI creates a system that goes far beyond conventional laser cutting systems and opens up new potential for efficiency and process reliability for users.
„Whether 2D, 3D, compact or XXL: The X-Series combines the highest precision, enormous speed and true digital intelligence in a modular system. Anyone who wants to increase their production output, reduce costs and sustainably expand their position in the market should definitely take a look at this new generation of industrial laser technology“ emphasizes Johannes Ried. According to Ried, this new machine family is not only intended to enable manufacturers to make technological improvements, but also to strengthen them strategically – by accelerating processes, reducing costs and simplifying the transition to the digital factory in the long term.
More information about the new X-Series: xseries.accurl-europe.com

13/1/2026
-
The trade fair for tubes will take place from April 13 to 17 in Düsseldorf – ACCURL Europe will be showing a tube and a flatbed laser live in action
From trade fair highlight to production success: Two years ago, the TubeLINE tube laser celebrated its premiere at the Tube – today it is successfully used in numerous production facilities throughout Europe and sets new standards in automated tube processing. At Tube 2026, ACCURL Europe will show how the range of this series has evolved.
Every two years, Düsseldorf in Germany becomes the centre of the tube manufacturing and processing industry. From 13 to 17 April 2026, the Tube trade fair will once again focus the full attention of more than 30,000 trade visitors and around 1,000 exhibitors on the topic of pipes, profiles and beams and their processing. ACCURL Europe’s TubeLINE tube laser, which celebrated its premiere at the Tube trade fair in 2024 and has since proven itself in numerous productions, will also be the focus of the 2026 trade fair presentation! (Hall 6, Stand A18).
The tube laser from ACCURL Europe is the ideal system for processing round pipes, profiles or beams quickly and precisely. Thanks to high-quality components, automatic loading and unloading and positioning, the processing of the various semi-finished products is reliable and also extremely efficient. The series is available as a 2D and 3D solution and can be designed for diameters from 12 to 580 mm and lengths up to 12.2 meters. Laser sources with an output of up to 15 kW are available. "Whether in plant or mechanical engineering, in energy or air conditioning technology as well as in the automotive and agricultural sectors – the cutting of tubes plays an important role on the way to the final product," says Johannes Ried, managing director of ACCURL Europe GmbH. "At ACCURL Europe we have several solutions to solve the cutting task of pipe – depending on the material, diameter, wall and automation requirements. Tube lasers of the TubeLINE series are excellent machines for all users who need to process tasks efficiently and precisely. We are looking forward to showing this series live on Tube 2026!"
In addition, ACCURL Europe will be presenting the extremely compact SMART Cube flatbed fiber laser– the ideal add-on machine for anyone who, for example, wants to have their own, reliable high-end cutting technology in production for reasons of flexibility – with manageable space requirements and highly attractive investment and operating costs.
Tube is the world's largest trade fair for the tube industry and tube processing technologies. This takes place every two years in the second quarter in Düsseldorf – as a trade fair duo together with Wire, the trade fair for wires and cables. More than 30,000 visitors are expected to visit the 40,000 square meter exhibition area and to take a closer look at the latest developments. The range of exhibitions is wide: machines for tube production and processing, innovative pipe materials and highlights of OCTG technology (tubes for oil and gas production); raw materials and accessories will be presented as well as tools for process engineering and additional auxiliary equipment. ACCURL Europe will be presenting itself in Hall 6, Booth A18.
More about the fair at https://www.tube.de

5/1/2026
-
Metal construction company from Bavaria invests in laser system and strengthens its manufacturing expertise
The Lower Bavarian company Kölbl Metallbau GmbH from Tiefenbach in the district of Passau can Kölbl Metallbau GmbH, a Lower Bavarian company based in Tiefenbach in the Passau district, looks back on a 40-year history. Founded in 1985 and now managed by Georg and Martin Kölbl, the medium-sized company has developed into a versatile provider of metal and steel construction services – complemented by a high-performance cutting center that encompasses four cutting technologies: plasma, oxy-fuel, waterjet, and, since 2025, laser.
"Our company is characterized by 22 well-trained employees who have mastered their craft. But also through a very modern machine park, which we always keep up to date and with which we can implement all the requirements of the metal construction industry internally," explains managing director and owner Georg Kölbl at the on-site appointment.
Kölbl Metallbau utillizes the four cutting processes that are decisive in metal construction today: laser, plasma, oxyfuel and waterjet – and each of them is deliberately applied in the family business. "Each of the four cutting technologies that we have on site has a right to exist, and none of them can be dispensed with," emphasizes Kölbl.
For example, the company has had a plasma-oxyfuel combination system from MicroStep for many years. The team mainly uses plasma to cut plates up to 35 mm material thickness – a process that delivers stable results relatively independently of the quality of the sheet surface. "A simple and uncomplicated cutting method," says Kölbl. Oxy-fuel technology is particularly strong for thick sheet metal: "With oxy-fuel technology, we cut structural steel with a material thickness of up to 150 mm," explains the managing director. And the waterjet system enables precision in materials for which thermal separation processes do not technically work or are not desired due to the heat input: Kölbl's company uses it to cut plastic, stone, glass or even granite, for example – even with the finest internal contours.
Since 2025, a new laser cutting system from MicroStep Industry powered by ACCURL has been strengthening production. "The laser is the perfect addition to our systems," says Kölbl. "This allows us to cut even the smallest inner contours – just like with a waterjet. This relieves our waterjet system, which is still indispensable." The new laser system has a working area of 4,000 x 2,000 mm and is equipped with an 8 kW Raycus laser source and a cutting head from the EX-TRABEAM® series from THERMACUT. It processes aluminum, stainless steel and structural steel as well as high-strength steels such as Hardox – and with sheet thicknesses from 1 to 25 mm.
Kölbl Metallbau and MicroStep Europa (ACCURL partner in Germany) have a long-standing relationship. "We bought the first system more than 20 years ago," Georg Kölbl recalls. The renewed award of the contract for a cutting system from MicroStep Europa was therefore no coincidence: "The fair advice, which really determines the best results for the customer, is really something special. And that's why the decision was made again in favor of MicroStep Europa." According to Kölbl, the implementation of the new laser system confirmed the decision: "The implementation was very professional – from planning and project planning, i.e. how the system is ideally placed in the room with all the necessary media, to training and commissioning." According to Kölbl, the start-up phase is particularly important: "If you have a new machine with a technology that is new to you, there are many questions at the beginning. And then you call MicroStep Europa and they quickly come up with a solution."
Georg Kölbl is extremely satisfied with the new MasterLINE laser system: "The performance level is very high. The machine is ready to start very quickly – until it runs, until you cut, it only takes a few minutes. And the running stability is also excellent."

19/11/2025
-
ACCURL opens new Smart Factory – ACCURL Europe and dealers worldwide congratulate and celebrate
A milestone in sheet metal processing: ACCURL has officially inaugurated its cutting-edge Smart Factory at its headquarters in Ma'anshan, eastern China. During the grand opening, several European ACCURL dealers received Awards for outstanding brand and sales achievements.
With the launch of the new Smart Factory, ACCURL sends a strong signal for the future of intelligent manufacturing. The investment of approximately €38 million creates a production environment that integrates digital manufacturing, smart technologies, and green energy.
The new facility spans more than 65,000 square meters and is designed to produce around 1,000 high-end systems annually – including laser cutting machines and CNC press brakes. Thanks to energy-saving and low-emission processes, the Smart Factory will reduce significant amounts of CO₂ and other emissions each year, setting new sustainability standards for the industry.
Cameron Lee, CEO of ACCURL, emphasized the significance of the day at the opening ceremony:
“Today marks the beginning of a new era. This Smart Factory is more than a building – it’s a statement: ACCURL is ready to shape the future of global manufacturing. Intelligence, precision, and sustainability will define the next chapter of our industry.”
“This Smart Factory represents the start of a new era for sheet metal processing. ACCURL creates optimal conditions for innovation, which will also benefit our customers all over Europe,” says ACCURL Europe Managing Director Johannes Ried, who attended the grand opening on-site together with his fellow Managing Director Igor Mikulina.
ACCURL impressively demonstrated at the event that innovation is more than a buzzword: numerous new system models premiered, showcasing the continuous advancement of state-of-the-art technologies for sheet metal processing. The presented systems feature high-precision control, energy-efficient drive concepts, and intelligent automation solutions that not only accelerate production but also elevate quality to a new level. With these innovations, ACCURL reinforces its role as a technological pioneer, offering dealers forward-looking solutions for the demands of an increasingly digitalized manufacturing world.
The grand opening was an international celebration: distributors and suppliers from around the globe joined representatives of the Chinese government to mark the beginning of a new era of smart manufacturing together with ACCURL.
A special highlight: as part of the festivities, several European ACCURL dealers were honored: MicroStep Europa – responsible for the German speaking countries – with the “Global Brand Builder Award”. TUWI, the ACCURL dealer of Benelux, received the “Sales Leadership Award”. The Norwegian retailer Meidell was delighted to receive the "Market Innovation Award" and the company Axe Status, responsible for Great Britain and Ireland, received the "Ambassador Award". Cameron Lee thanked the winners warmly: “These awards are a recognition for the support in successfully establishing the ACCURL brand in Europe and building a strong market presence.”

12/11/2025
-
With the MasterLINE fiber laser and the EuroMaster press brake KreLe focuses on maximum precision and flexibility
KreLe GmbH, based in the Innviertel region of Upper Austria, has been manufacturing precise laser parts and laser bent parts for customers in the mechanical engineering, metal technology, and locksmith industries in Austria and Germany since 2022. At the heart of the modern machinery are a MasterLINE laser cutting machine (which is sold in German-speaking countries under the product name “MSE SmartFL”) and a EuroMaster press brake, with which KreLe can precisely implement even demanding 3D components. In addition to state-of-the-art CNC technology, the company particularly appreciates the personal and reliable service of MicroStep Europa (ACCURL partner in Germany).
Founded by Florian Lengauer and Maximilian Kreiseder, KreLe produces state-of-the-art solutions for metal processing at its Perwang am Grabensee site – from prototype production to series production. The customer base mainly includes companies from the mechanical engineering sector in Austria and Germany, but metal technology and locksmith companies also rely on KreLe's expertise. With around 1,000 tons of raw material processed annually, the contract manufacturer is recording steady growth. However, despite the increasing volume of orders, KreLe remains flexible with its current four employees and can also reliably implement short-term customer orders.
Since 2023, KreLe has been relying on a cutting system from the MasterLINE series from ACCURL. Equipped with 6 kW 2D fiber laser technology, an automatic shuttle table and a working area of 4,000 x 2,000 mm, the company uses it to cut steel up to 25 mm and aluminum and stainless steel up to 15 mm sheet thickness. Initially, a used press brake complemented the machinery, which was replaced by a EuroMaster from ACCURL at the end of 2024. This offers 320 tons of press force, a bending length of 4,000 mm and is equipped with an angle measuring system, bending aids and a modern Delem control system. "This means that we can realize all 3D components and are also ideally positioned when it comes to bending," emphasizes managing director Florian Lengauer. KreLe rounds off its range of services with additional processing steps such as welding and edge rounding using a deburring machine.
The state-of-the-art machinery enables the production of special formats up to 4,000 mm in length using the latest CNC technology. For managing director Maximilian Kreiseder, the choice of machine supplier was quickly clear: "We chose MicroStep Europa, the responsible ACCURL dealer for all German-speaking countries, because of their humanity, because contact with customers is simply their top priority, as is for us. Whether in the field or by technicians on site: The support provided by MicroStep Europa convinced KreLe from the very beginning. The most important thing for us was the service. They are actually available for us around the clock. Not least, that was the decisive reason why we also purchased the second machine from MicroStep Europa."

24/10/2025
-
ACCURL Europe convinces at Blechexpo and SCHWEISSEN & SCHNEIDEN – Industry invests more intensively again
Two leading trade fairs, one strong signal: ACCURL Europe can look back on a successful trade fair fall. The presence at Blechexpo in Stuttgart and SCHWEISSEN & SCHNEIDEN in Essen has shown how great the interest in innovative cutting and bending technologies as well as digital solutions is – and how important personal discussions remain.
With a clear focus on high-tech and digitalization, ACCURL Europe presented itself at two leading international trade fairs for sheet metal working and joining technology in the fall of 2025. At the Blechexpo in Stuttgart as well as at the SCHWEISSEN & SCHNEIDEN in Essen, the interest in ACCURL Europe's solutions was enormous.
“We sensed that the industry is once again looking to the future with much greater optimism,” says Managing Director Johannes Ried, drawing a positive conclusion. “The discussions at both trade fairs were characterized by concrete investment plans and a genuine desire for innovation. This shows that the economic situation is stabilizing and that the industry is once again focusing more strongly on new, modern technologies.”
The focus of interest at the ACCURL Europe booths was on the latest developments in the field of laser cutting of sheet metal, pipes, profiles and beams – with automated material handling playing a major role, among other things. "We are also particularly pleased that we have made a name for ourselves in the field of high-precision bending technology in recent years," says Johannes Ried commenting on the enormous demand in this area.
ACCURL Europe would like to thank all visitors for their great interest and is looking forward to continuing the discussions – whether digitally or in person.

3/9/2025
-
BIKU Laser- und Metalltechnik invests in the smart 2D fiber laser MasterLINE
Founded in 2021 as a two-man operation, BIKU Laser- und Metalltechnik has developed into a high-performance manufacturing company in a very short time. With a broad portfolio, a high level of vertical integration and modern technology, the team now serves customers from a wide range of industries. The investment in a laser cutting system from MicroStep Europa (ACCURL partner in Germany) is another significant step towards even greater efficiency and process reliability in contract manufacturing.
In Bad Wurzach, a small spa town in the Upper Swabian Allgäu, BIKU Laser- und Metalltechnik GmbH has its headquarters. Since it was founded in 2021 by the two managing directors Philipp Kuhn and Markus Birk, the company has developed dynamically: What began as a two-man locksmith's shop is now a modern manufacturing company with eight qualified specialists. BIKU's range of services extends from the manufacture of welded assemblies and steel construction components to extensive contract manufacturing work in sheet metal processing. The customers are just as diverse as the projects – from mechanical engineering and special machine construction to the food and pharmaceutical industries to forestry and agricultural machinery technology, the packaging industry and the construction industry. Whether prototypes, small or large series – BIKU implements tailor-made solutions that are precisely designed to meet the requirements of its customers, from planning to production.
In production, BIKU relies on modern technologies and offers a wide range of services – including bending, welding, milling and surface finishing. A particularly central area within production is sheet metal cutting. To increase vertical integration and be able to react flexibly to customer requirements, the company invested in a high-performance plasma cutting system from ACCURL as early as 2022 – initially for classic applications in the construction and locksmith sector. However, with the continuous increase in contract manufacturing orders, the requirements for precision and cutting quality also increased. In order to meet these requirements and ensure reliable further processing, BIKU started looking for a suitable laser cutting solution – with success.
The decision was once again made in favor of MicroStep Europa (the ACCURL dealer for the German-speaking market) —and quite deliberately so. “Our collaboration with MicroStep Europa on a previous system was already excellent. The support was very good back then, which is why we didn't even bother asking anywhere else, but decided directly in favor of them, because we were simply in good hands here and still are,” explains Managing Director Markus Birk.
Since 2023, a laser cutting system from the MasterLINE series (which is sold in German-speaking countries under the product name “MSE SmartFL”) with a working area of 3,000 × 1,500 mm and 6 kW laser power has been ensuring maximum precision – and replacing the previous plasma technology. It enables precise cutting of steel up to 25 mm and stainless steel and aluminium up to 15 mm material thickness. "We are very satisfied with the laser cutting system. This allows us to cover our spectrum ideally and we are in a top position in terms of process reliability," adds managing director Philipp Kuhn.
With this investment, BIKU Laser- und Metalltechnik has taken its production to a new level. As a flexible and efficient company with a high level of vertical integration and state-of-the-art technology, BIKU is now optimally positioned to meet the requirements of contract manufacturing – with MicroStep Europa as a reliable partner at its side
Request a personalized machine recommendation from our engineering team.
Get in touch with us!
Messerschmittstraße 3,86825 Bad Wörishofen,Germany
8 a.m. – 5 p.m.
8 a.m. – 3 p.m.
© 2026 Copyright & Page Design by ACCURL Europe - All rights reserved.